锁闭阀如何安装?

Release time:

2022-05-10

锁闭阀如何安装?

集中供暖的家用锁闭阀有很多种,主要是开启方式不同,但阀门本身的基本结构是相似的,安装时要注意朝向;

1.安装锁闭阀用特殊钥匙打开;锁闭阀应安装在循环水的供水管道上,阀门上的箭头应与流水方向一致。为了在维护期间更换阀门,应该在阀门后面安装一个管接头。

2.安装锁闭阀由磁 卡打开;锁闭阀应安装在循环水的供水管道上,阀门上的箭头应与流水方向一致。为了在维护期间更换阀门,应该在阀门后面安装一个管接头。

3.集中供热的分户循环水回水管也要配阀门,普通阀门即可。为了在维护期间更换阀门,应该在阀门后面安装一个管接头。

锁闭阀如何操作?

1.解锁:当阀门被控制打开、调节和关闭时,以及当处于锁定状态的锁帽处于打开状态时,使用该过程。把钥匙放在锁帽上,让钥匙上的小红点对准锁上的小点,轻轻往下按几下。

2.锁紧盖子

(1)即弹起,即处于打开状态。

(2)用手拉起锁定帽。

3.调节控制:用手(自备)移动阀杆,调节指针,指向指示盘显示的0-1,完成关闭→调节→开启的相应过程。然后锁紧,使阀体处于保护状态。

4.锁定:完成(1)?(2)然后,将处于解锁状态的锁帽(2)放在阀体上部(3),轻轻将锁帽中的小钢球向下压入阀体上部的滚道中,用手试着向上拉锁帽,不离开锁体即可完成锁紧过程,使阀门处于锁紧状态。

5.增加测温的操作方法:“轻轻”拧下阀门底部探头孔内的螺丝,然后将带密封圈的测温探头(或其他装置)伸入人孔内,并适当拧紧。(添加前,应关闭管道。) 6.当阀门被锁定时,用户不允许使用其他工具随意启动或破坏锁帽,否则会损坏阀门甚至导致蒸汽和水释放的严重后果。供热部门要指定专用工具打开阀门。

What are the uses of pressure reducing valves?

The development prospect of the pressure reducing valve industry is very good, because it brings more benefits to the enterprise when it is used, so it is favored by customers, in order to let you know more, next we will tell about the use of the pressure reducing valve, and hope to help more people.

2023-02-07

What should I pay attention to when using pressure reducing valve?

The application range of pressure reducing valve is very wide, we must know the precautions of using pressure reducing valve before use, so that we can better apply it. If you are interested in this topic, let's take a look and hopefully help some of the people involved.

2023-01-31

What are the advantages of pressure reducing valves?

What are the advantages of pressure reducing valves? I believe that many friends are not clear, in order to enhance everyone's understanding, the following Xiaobian to introduce this problem in detail, interested to see together! If you're interested, check it out here.

2023-01-18