地暖分水器如何使用 地暖分水器正确安装方法介绍

Release time:

2022-03-07

地暖随着冬天的脚步慢慢深入家家户户,地暖分水器在整个地暖系统中起着非常重要的作用,用于在逆流构成和集水构成之间来回运输。因此,安装地暖分水器时要特别小心。有人问我如何使用地暖分水器。正确安装才能正常工作。

地暖分水器是室内温热供暖的控制中枢,具有果实体流入室内后经过多功能过滤器进入喷水器主棒的功能。在这个环节,过滤器过滤水果中的杂质,防止杂质进入地下管网,堵塞管道。主峰是水平安装的,利用相同高度、压力相同的原理,果实体均匀分配到地管上,经过热交换系统,让各管道返回集水区,再流向主峰,然后流入回收口的加热系统。

步骤1:连接入口和出口喷嘴

首先,将各环路加热管道的出入口分别连接到喷水器、集水池。饮水机、集水内径不能小于总供给、回收内径,饮水机、集水大断面流速不能大于0.8m/s。每个分配器、集水分支环路不得超过8个。每个分支回路供水管道安装铜球阀等可关闭阀门。

步骤2:对应于安装阀

地暖分水器前的供水连接管应沿流动方向安装阀门、过滤器和排水管。喷水器前安装两个阀门,主要是清洗过滤器,更换或维修热量表时关闭。过滤器是为了防止杂质堵塞流量计和加热管道。热量表前面的阀门和过滤器也可以用过滤器球阀代替。

集水区后面的汇水连接管安装排水管,并安装平衡阀或其他可关闭的调节阀。系统附件应使用防腐蚀材料。安装排水装置,在验收之前和之后维修时用于清洗管道和排水。排水装置在附近有支流等排水装置。

步骤3:设置旁路

地暖分水器的总流入管和集水器的总流出管之间要安装防通关管,在防通关管上安装阀门。防通管的连接位置在总进口管的起始部分(阀门前面)和总排放管的末端(阀门后面)之间,在清洗加热管道系统时,防止水流入加热管。

步骤4:设置手动或自动排气阀

在地暖分水器、集水池中安装手动或自动排气阀。尽可能安装自动放气阀,为用户在今后的使用过程中提供便利,防止冷热差压和补水等因素造成的集气,妨碍系统运行。









 

What are the uses of pressure reducing valves?

The development prospect of the pressure reducing valve industry is very good, because it brings more benefits to the enterprise when it is used, so it is favored by customers, in order to let you know more, next we will tell about the use of the pressure reducing valve, and hope to help more people.

2023-02-07

What should I pay attention to when using pressure reducing valve?

The application range of pressure reducing valve is very wide, we must know the precautions of using pressure reducing valve before use, so that we can better apply it. If you are interested in this topic, let's take a look and hopefully help some of the people involved.

2023-01-31

What are the advantages of pressure reducing valves?

What are the advantages of pressure reducing valves? I believe that many friends are not clear, in order to enhance everyone's understanding, the following Xiaobian to introduce this problem in detail, interested to see together! If you're interested, check it out here.

2023-01-18